Home Feedback Search Forum

 

Primer Tray

 Introduction
Press Table
Theory of Operation
Press Identification
Primer Pin
Indexing
Shell Plate
Case Retainer
Primer Depth Setup
Turret
Setting the Dies
Primer Tray
Powder Disk
Final Adjustments
Lubrication
Case Feeder
Calibers Change
Bullet Feeder
Modifications

 

Fill the primer tray up, put it on the press and tap the side of it slightly to insure that the primers slide down the primer trough properly. VIDEO

.

 
Send mail to nicknitro71@yahoo.com with questions or comments about this web site.
Copyright 2008 Loadmastervideos
Last modified: 04/11/08